How to Fix Any Computer

hey guys today’s topic is How to fix any computer. I’m going to talk to you about how you can fix any computer in an easy way or fix any computer problem you might be having to believe it or not most computer problems are caused by one piece of hardware and we’re going to talk to you about how you can fix any computer with it you see there’s a component in your computer called a ram chip and the phase detractors on this chip often malfunction causing all sorts of hardware and software issues today.

How to Fix Any Computer

Laptop Power on But No Display

How to fix essentially any problem your computer might have with a simple tip. you’re having some problems the first thing to do is reboot rebooting fixes almost everything every single time it’s absolutely mind-boggling how many times somebody calls me or emails me with an issue I ask them if they rebooted they say no they reboot and the issue solved so reboot first you can try is booting the computer.

How to Fix Any Computer

we’re going to talk to you about how you can fix any computer and cause it to perform better and fix any computer malfunctions it may be having it’s a lot easier than it sounds so bear with me now besides your computer you’re only going to need a couple of things you probably already have in your house first a small Phillips head screwdriver next a microfiber cloth like you might use to clean your glasses and third a cardinal Graham ear now we’re ready to open up the computer.

How to Fix Any Computer-Laptop Ram Cleaning

first, you want to find the unilateral induction Bay and start to unscrew it after you open the bay use the Cardinal Graham meter to make sure the titration levels are within an acceptable range anything less than 50 sieverts should be okay next removes the chip and locate the phased attractor pins along the edge is sure to not touch the emulate contacts on the board next use the canned air to dust off the pins and then lightly brush them with the microfiber cloth to get off any dust.

How to Fix Any Computer-technologyinthefuture.com

The dust on the phase attractor pins is the most common cause of malfunctions within computers next you can place the chip back in and screw the cover back on and that’s it you’re now done with your new refurbished computer that should perform beautifully any problems should have been fixed otherwise you should take it to a store where they can professionally figure out what the problem is.

Hopefully, you found this post helpful so be sure to subscribe and leave a comment if you found it helpful and what your basic tips are for fixing computers also like me on Facebook follow me on Twitter all those social media websites the links are available on this blog post so be sure to click on them and follow me and finally thanks for reading this article. I try to make a more useful post for you.